VMIVME-5576 - VMIC VMIVME-5576 Reflective Memory Module. VME Fiber-Optic Reflective Memory with...
Request Quote
For Price
- Part Number:
- VMIVME-5576
- Model Number:
- VMIVME-5576
- Make:
- VMIC
- Lead Time:
- Available
- Qty In Stock:
- Available
VMIC VMIVME-5576 Reflective Memory Module. VME Fiber-Optic Reflective Memory with Interrupts | VME bus | 175 Mega Baud Reflective Memory | Up to 2,000 m between nodes and up to 256 nodes Simple Type: Reflective Memory Module
VMIC’s VMIVME-5576 Reflective Memory interface allows data to be shared between up to 256 independent systems (nodes) at rates up to 6.2 Mbyte/s. Each Reflective Memory board may be configured with 256 Kbyte to 1 Mbyte of on-board SRAM. The local SRAM provides fast Read access times to stored data. Writes are stored in local SRAM and broadcast over a high-speed fiber-optic data path to other Reflective Memory nodes. The transfer of data between nodes is software transparent, so no I/O overhead is required. Transmit and Receive FIFOs buffer data during peak data rates to optimize CPU and bus performance to maintain high data throughput.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- A24:A32:D32:D16:D8 Memory Access
- Also Available for EISA and ISA Using VMIVME-103 and VMIATX-5521 Link
- Any Node on the Network Can Generate an Interrupt in Any Other Node on the Network or in All Network Nodes
- Data Transferred at 3.2 Mbyte/sec with Redundant Transfer
- Data Transferred at 6.2 Mbyte/sec without Redundant Transfer
- Data Written to Up to 2,000 m Between Nodes, Supports Up to 256 Nodes
- Device Driver That Includes Internet Protocol. See VMIVME/SW-RFM1 .
- Error Detection
- High-Speed, Easy-to-Use Fiber-Optic Network (170 Mbits/sec)
- Network compatible with the PCI version (VMIPCI-5576) and Multibus I version (VMIMB1-5576)
- No Processor Involvement in the Operation of the Network
- No Processor Overhead
- Redundant Transmission Mode for Suppressing Errors
- Single 6U Board
- Supported by VMIC's Universal I/O Controllers (UIOCs) (VMIVME-9300 Series) and Intelligent I/O Controllers (IIOCs) VMIVME-90XX for Host Connectivity
- Supports Optional Automatic Fiber-Optic Bypass Switch (VMIVME-5599)
- Up to 1 Mbyte of Reflective Memory
- Uses VMIVME/SW-5550 Drivers. See Software Section for Available drivers.
Specifications
- Access Time: 400 ns (worst-case arbitration), 200 ns (best-case arbitration)
- Cable Length: 2,000 m maximum between nodes
- Cable Requirements: Two fiber-optic cables
- Configuration: Daisy chain ring up to 256 nodes
- Memory Size: 256 Kbyte, 512 Kbyte, or 1 Mbyte
- MTBF: 142,400 hours (217F)
- Transfer Rate: 6.2 Mbyte/s (longword accesses) without redundant transfer 3.2 Mbyte/s (longword accesses) with redundant transfer
- VMEbus: This product complies with the VMEbus
Applications
- None Available
Aliases
- None Available