VME-4150 - VMIC VME-4150 Analog I/O - Isolated 12-Channel 12-bit Analog Output...
- Part Number:
- VME-4150
- Model Number:
- VME-4150
- Make:
- VMIC
- Lead Time:
- Available
- Qty In Stock:
- Available
VMIC VME-4150 Analog I/O - Isolated 12-Channel 12-bit Analog Output Board with Voltage or Current Loop Outputs Simple Type: Analog I/O Module
The VMIVME-4150 provides 12 isolated high quality 12-bit analog output channels on a single 6U form factor VMEbus board. Each channel is electrically isolated from all other channels and from the VMEbus, as illustrated in the functional block diagram as shown in Figure 1, and will operate with sustained isolation voltages as high as 1,000 V. Output voltage ranges are selectable as ±2.5, ±5, and ±10 V, or 0 to +2.5 V, 5 V, 10 V, and full 10 mA loading is supported throughout these ranges. Four-, eight-, and twelve-channel configurations are available.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 0.05 Percent Accuracy for Voltage Outputs, 0.08 Percent for Current Loop Outputs
- 10 mA Load Capacity for Voltage Outputs Over Full ±10 V Range
- 12 Fully Isolated Analog Outputs
- 12-bit Resolution
- 4-, 8-, and 12-Channel Configurations
- Available with 4 to 20 mA Current Loop Outputs
- Barrier Terminal Strips Available
- Compatible with VMIC's Universal I/O Controllers (VMIVME-9300 Series)
- Front Panel Access
- Optical Data Coupling Provides Full Galvanic Isolation
- Static Readback Data Registers Simplify Program Control
- Up to 1,500 VDC Isolation, Channel-to-Channel and Channel-to-Bus (1,000 VDC Standard)
- Voltage Output Ranges Selectable as ±2.5, ±5, or ±10 V
Specifications
- Common-Mode Voltage Range: CMV - ±1,000 V, Channel-to-Channel, Channel-to-VMEbus
- Compliance: 9 V with internal supply; 27 V with external loop power supply
- Configuration: Differential, isolated Channel-to-Channel, Channel-to-VMEbus
- Current Range: 4 to 20, 0 to 20, or 5 to 25 mA; See the Ordering Options from datasheet
- Nonlinearity: 0.035 percent
- Number of Output Channels: 4, 8, or 12; See the Ordering Options from datasheet
- Offset Current: ±4 µA
- Output Impedance: Greater than 10 M Ohms, 0 to 25 V
- Resolution: 12 bits
- Span: 16 or 20 mA, depending on current range
- Span Drift: ±50 PPM/°C ±70 PPM/1,000 hr
- Span Error: ±0.06 percent
Applications
- None Available
Aliases
- None Available
Related Items
VMIVME-4116
VMIC VMIVME-4116 8-channel 16-bit Digital-to-Analog Converter Board.
VMIVME-4132
VMIC VMIVME-4132 32-Channel Analog Output Board with Built-in-Test
VMIVME-4150
VMIC VMIVME-4150 Analog I/O - Isolated 12-Channel 12-bit Analog Output
VMIVME-4120
VMIC VMIVME-4120 12-Bit Analog Output Board