VMIVME-2128 - VMIC VMIVME-2128 - 128-bit High-Voltage Digital Output Board with Built-in-Test...
- Part Number:
- VMIVME-2128
- Model Number:
- VMIVME-2128
- Make:
- VMIC
- Lead Time:
- Available
- Qty In Stock:
- Available
VMIC VMIVME-2128 - 128-bit High-Voltage Digital Output Board with Built-in-Test Simple Type: PLC Digital Output Module
The VMIVME-2128 is designed for a variety of applications such as: Relay drivers Lamp drivers, Solenoid drivers, Hammer drivers, Stepper motor drivers, LED drivers, High-current, high-voltage drivers, Fiber-optic LED drivers.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 128 bits of high-voltage outputs
- A24:A16:D32/D16/D08 (EO): slave 39/3D:29/2D:6U form factor
- Automatic surge current shutdown protection
- Built-in-Test logic for fault isolation
- Compatible with Intelligent I/O Controllers
- Front panel with fail LED
- High breakdown voltage (55 V)
- High-current drivers (600 mA sink)
- Optional pull-up resistors for electronic switch outputs
- Output clamp diodes for inductive ?yback protection
- Sockets are provided for warming resistors, which are supplied by the user
- Thermal shutdown protection
- VMEbus compatible (ANSI/IEEE STD 1014-1987 IEC 821 and 297)
Specifications
- Addressing Scheme: Thirty-two bytes individually addressable on 8-, 16-, or 32-bit boundaries. A Board ID Register is located at the base address of the board. A Control and Status Register (CSR) is stacked above the ID Register. The sixteen input bytes are placed above the CSR. Twenty jumpers establish the base address of the board. Another jumper is used for standard or short I/O accesses. The following address map shows the relative locations of all the registers used by the board.
- Compliance: This product complies with the VMEbus specification (ANSI/IEEE STD 1014-1987 IEC 821 and 297) with the following mnemonics: A24:A16:D32/D16/D08 (EO): Slave: 39/3D:29/2D:6U form factor
- Dimensions: Double Eurocard (6U), 160 x 233.35 mm
- Humidity Range: 20 to 80 percent relative, noncondensing
- I/O Organization: Sixteen output ports, eight bits wide for a total of 128 inputs, addressable to any address within the short supervisory and/or short nonprivileged or the standard supervisory and/or standard nonprivileged I/O map.
- Power Requirements: 3.0 A (typical) at 5 V
- Temperature Range: 0 to +55 °C, operating, -20 to +85 °C, storage
Applications
- None Available
Aliases
- None Available
Related Items
VMIVME-2120
VMIC VMIVME-2120 64-bit High-Voltage Digital Output with Built-in-Test
VMIVME-2127
VMIC VMIVME-2127 128-Bit Digital Output Board
VMIVME-2131
VMIC VMIVME-2131 64-bit Current Source / Sink Driver Megamodule Board
VMIVME-2170A
VMIC VMIVME-2170 32-Bit Optically Coupled Digital Output Board