VME-5532L - VMIC VME-5532L VMEbus - Fiber-Optic Repeater Slave Chassis System Controller

VME-5532L - VMIC VME-5532L VMEbus - Fiber-Optic Repeater Slave Chassis System Controller...

VMIC VME-5532L VMEbus - Fiber-Optic Repeater Slave Chassis System Controller Simple Type: Repeater Link

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Advantages Over Standard Repeaters (Small Cables. High-Noise Immunity. High-Voltage Isolation. No EMI Generated by Cables)
High-Performance, Easy-to-Use Method of Linking Two or More VMEbus Systems Together Via Fiber-Optic Cable
Maximum 6,560 ft (2,000 m) Fiber-Optic Cables
Multiple VMIVME-5532 Slave Boards May Be Installed in a Single Chassis Allowing Multiple Remote Computers Access to One I/O Resource
Provides System Controller Function in the Slave Chassis (Jumper Enabled)
Register Enable Allows Operation as Described Above, But Includes Registers in Short I/O Space Dealing with Slave Chassis Multimaster Operation
Software Transparent Allows Direct Communication from Master Chassis to Slave Chassis with No Software Overhead (Unidirectional Link Control with Bidirectional Data Transfers)
Supports 16-, 24-, and 32-bit Addressing
Supports 8-,16-, and 32-bit Data Transfers
Supports a Local Master in Slave Chassis
The VME-to-VME Link Consists of Two Boards and Two Fiber-Optic Cables
This Mode Allows Plug-and-Play Operation
Total Electrical Isolation Between VMEbus Systems

General

Address Modifiers: 09, 0D, 29, 2D, 39, 3D
Altitude: Operation to 10,000 ft (3,048 m)
Bandwidth at 1,300 nm: 500 MHz-km
Boot Length: 20 to 60 mm
Buffer Size: 900 micron
Clad Size: 125 micron
Connector Style: ST, 2.5 mm Bayonet, both ends
Cooling: Forced air convection
Dimensions: Double height (6U) board 160 x 233.35 mm
Fiber Size: 62.5 micron
Humidity: 20 to 80 percent, relative noncondensing
Length: 5 to 6,560 ft (1.5 to 2,000 m)
Maximum Attenuation at 1,300 nm: 9.0 dB (including connectors)
Mode: Multi
Quantity Required: 2 per link
Read Cycle Overhead: 4.0 µs maximum
Temperature: 0 to 65 °C, operating -20 to 85 °C, storage
Transfer Rate (Maximum) (10-foot Cable Length): Assuming a slave board in the slave chassis responds in 250 ns: 1 Mbyte/s minimum (D32)
U.L./NEC Rating: OFNP
Write Cycle Overhead: 4.0 µs maximum